Chemical Composition

Chemical composition	C:0.8-1.20;Si:0.60-1.20;Mn:0.70-1.20;S:¡Ü0.03;P:¡Ü0.03
Density	>7.3g/cm3
Hardness(¡À 3HRC)	HRC40-45            HRC45-50          HRC50-60
Microstructure:	The microstructure should be uniformly tempered marten site with fine. Well distributed carbides.Network carbides.Decarbonized surfaces. Inclusions or quench cracks are undesirable.

Chemical Composition

Chemical composition	C:0.8-1.20;Si:0.60-1.20;Mn:0.70-1.20;S:¡Ü0.03;P:¡Ü0.03
Density	>7.3g/cm3
Hardness(¡À 3HRC)	HRC40-50	HRC50-60	HRC61-66

• Hardness:HRC40-50,50-60,61-65
• We accept Special orders and can satisfy special requirements from customers.

Low carbon steel shots are produced using selected high-grade, low residual low-carbon scrap. Due to its resistant character, low carbon steel shot has 20% longer life than high carbon steel shot.

Stainless Steel Pellets

    Stainless Steel Pellets are the ideal material for polishing and grinding.They have special advantage and capability and are produced perfectly on the international advanced produce line and progress.
    They are widely used in polishing the surface aluminum,copper and iron pressed articles,polishing varieties of metal works,removing hair or stab of pressed articles,and sandblasting or grinding of knives and pressed articles.They can make your products clear,slippery,shiny and white to the satisfying effect.Itcan last 1000times longer and get the ash 1/70 less than glass grit.Because it split little,it can give the products a more solid surface.

Feature:

    Top quality,but lower consumption of the block-processing factories due to high tensile strength,wear-resistance.

>Technical details.