Technical Articles
  • What Can We Do If Hook Shot Blast Machines Are Broken?
    Posted: 09/21/2017 11:23:46  Hits: 7
    Fault diagnoses of shot blasting machines 1. Abrasive impellers with abnormal vibration Blades need to be changed when they wear seriously and are not operated smoothly. Impellers need to be changed when they wear seriously. Bearings burnt out need to be changed and new bearings should be lubricat...
  • Solutions to Complicated Workpieces of Shot Blasting Machines
    Posted: 09/18/2017 10:20:10  Hits: 10
    For the shot blasting machines, how can we blast light metal castings and iron castings with deep holes effectively?  This questions is not only for shot blasting machine manufacturers, but also for car, car component and engine cylinder manufacturers. So, on the premise of not decreasing the ...
  • Two Main Factors Worth Considering in the Process of Purchasing Shot Blasting Machines
    Posted: 08/21/2017 10:09:14  Hits: 21
    Invented in 1930s, shot blasting machines belong to rust removing facilities and obtain wide  applications especially involving the steel industry, the foundry industry and the automobile manufacturing industry.  Based on extensive applications, there are various kinds of shot blasting ma...
  • Working Principles of All Types of Shot Blasting Machines(Part One)
    Posted: 05/25/2017 10:42:24  Hits: 52
    Since many people may not know much about shot blasting machines or have never heard of them, JX Abrasive has listed working principles of shot blasting machines for you.  1. What are functions of shot blasting machines? (1) To remove rusty layer, welding slag, oxide scale, making product surf...
  • Operational Instructions of Shot Blasting Room
    Posted: 05/15/2017 10:37:56  Hits: 38
    1. Observe GOS(General Operating Specification) of shot blasting quipment.  2. Rules for operating shot blasting machines  (1) Check wear patterns of blade, guide sleeve and impeller of abrator head. If they wear seriously, you can inform maintenance personnel. (2) Ensure iron shot convey...
  • How to Maintain Drum-type Shot-blasting Machines
    Posted: 03/27/2017 03:46:01  Hits: 50
    A drum-type shot-blasting machine is very common. The machine which is frequently used needs a certain maintenance. Maintenance methods for drum-type shot-blasting machine can be adapted for crawler-type shot blasting machine, roller bed shot-blasting machine, etc. 1. Daily Maintenance (1) Inspect ...
  • Classification of Shot Blasting Machine
    Posted: 08/08/2016 05:42:55  Hits: 127
    According to the structure of the castings’ bearing body of Shot blasting machine, it can be divided into tumble shot blast machine, hook shot blast machine, hoist shot blast machine , rotary table shot blast machine, and blast room etc. Tumble shot blast machine is suitable for castings with...
  • Design Principles and Features of Blasting Room
    Posted: 08/02/2016 03:34:11  Hits: 92
    The main feature of the blasting room is in the process of blasting the operator stay in the room. The protective clothing suit and the helmet can prevent the operator from being impacted by the abrasive, and the ventilation device can provide the operator with fresh air through the helmet. Blastin...
  • The Introduction and Application of Cut Wire Shot
    Posted: 07/27/2016 05:21:32  Hits: 112
    There are introduction and application of cut wire shot. Introduction of cut wire shot Steel wire cut shot, according to different steel wire in cutting process, is divided into stainless steel cut wire shot and ordinary high carbon steel cut wire shot and low carbon steel cut wire shot. The shot h...
 123 Next >>