Technical Articles
  • The Production Methods and Chemical Components of SS Shot
    Posted: 06/22/2016 03:16:30  Hits: 27
    Stainless steel shot, also known as stainless steel pill, stainless cast round steel wire shot, stainless steel cut wire shot, it is mainly used for shot blasting, sand blasting, shot blasting processing, peen forming, polishing, strengthening, matting, correction, retreat paint, removing the corros...
  • Application and Characteristics of Cast Steel Shot
    Posted: 06/15/2016 02:41:10  Hits: 54
    I. Application:  Cast steel shot is widely applied in descaling and derusting treatment of iron and steel parts before painting, in this case centrifugal blast cleaning equipment often used. Spherical shape and smaller hardness make steel shot does not produce large wear on the equipment. Stee...
  • Problems and treatment methods of shot blasting machine
    Posted: 06/06/2016 08:48:47  Hits: 159
    The shot blasting machine will appear a variety of problems during the using process, experts of Jinxing Steel Shot Company will show you some common problems and treatment methods of shot blasting machine here. I. The dust gathering by dust collector containing too much shot. The air on the splitt...
  • Oil Spilling of Shot Blasting Machine and Measurement
    Posted: 05/06/2016 03:51:11  Hits: 89
    Oil spilling is one of the most common problems of shot blasting machine and how to deal with it is quite essential. 1.Oil spilling of rotary shaft. Rotary shaft of shot blasting machine including gear lever, shaft axis of clutch and decompression engine shaft. Cause and measurement: if the shaft a...
  • Producing Methods of Steel Shot
    Posted: 03/24/2016 05:11:33  Hits: 295
    Steel shot is a kind of metal abrasive which can be used to clean rust, oxidation film and other pretreatments for steel profiles. Generally, steel shots have several producing methods. 1.Rolling Pouring the liquid metal into a rotating cylinder, the liquid metal will splash and fall into the water...
  • Maintenance Work for Shot Blasting Machines
    Posted: 03/11/2016 11:05:45  Hits: 210
    Appropriate maintenance work can not only improve the working efficiency, but also can extend the service life of the shot blasting machine. Daily maintenance 1. Check the loose conditions of all bolts on components and electrical devices and tighten the loose parts immediately. 2. Check the abrasi...
  • Major Applications of Shot Blasting Machine
    Posted: 02/25/2016 01:55:31  Hits: 235
    Shot blasting machine has a wide range of applications in automobile, foundry and bearing industry etc. 1. Foundry industry Generally, castings produced by foundry factories need to be polished, and shot blasting machine is a professional machine for it. Choosing different kinds of blasting machine...
  • How to Choose Suitable Steel Grit
    Posted: 01/19/2016 05:22:31  Hits: 295
    There are several standards for high-quality steel grit. Firstly, the steel grit can be used in the surface of workpiece, and can clean the surface effectively. Secondly, the steel grit should have a long endurance life and can reduce the consumption during application.     1. Chemica...
  • Key Points of Installating Blasting Machine
    Posted: 01/05/2016 03:41:24  Hits: 260
    There are several key points need to be noticed when installing the blasting machine. 1. Check the safety and quality of grinding wheels before installation. Operators can use nylon hammer or pen to tap the grinding wheels, if the sound is clear, then the wheels can be installed. 2. Positioning. W...